Archivematica 1.14.1 é uma versão antiga, e estes documentos não estão sendo mais atualizados.

Maintenance

This page contains information relevant to maintaining your Archivematica installation.

On this page:

Management commands

Archivematica implements multiple management commands using the command interface provided by the Django web framework.

A full list of commands can be retrieved as follows:

sudo -u archivematica bash -c " \
    set -a -e -x
    source /etc/default/archivematica-dashboard || \
        source /etc/sysconfig/archivematica-dashboard \
            || (echo 'Environment file not found'; exit 1)
    cd /usr/share/archivematica/dashboard
    /usr/share/archivematica/virtualenvs/archivematica/bin/python \
        manage.py help
";

If you want to see the help message of a specific command, try:

sudo -u archivematica bash -c " \
    set -a -e -x
    source /etc/default/archivematica-dashboard || \
        source /etc/sysconfig/archivematica-dashboard \
            || (echo 'Environment file not found'; exit 1)
    cd /usr/share/archivematica/dashboard
    /usr/share/archivematica/virtualenvs/archivematica/bin/python \
        manage.py help purge_transient_processing_data
";

We’ve looked up purge_transient_processing_data in the example above. The description should provide enough information and, in some cases, usage examples.

Finally, we’re showing an example on how to execute a command passing some optional arguments:

sudo -u archivematica bash -c " \
    set -a -e -x
    source /etc/default/archivematica-dashboard || \
        source /etc/sysconfig/archivematica-dashboard \
            || (echo 'Environment file not found'; exit 1)
    cd /usr/share/archivematica/dashboard
    /usr/share/archivematica/virtualenvs/archivematica/bin/python \
        manage.py purge_transient_processing_data --dry-run
";

Maintaining Elasticsearch

Since version 0.9, Archivematica uses Elasticsearch as its search engine. Elasticsearch stores information about AIPs and Transfers in backlog. This data can be searched from the Archival Storage and the Backlog tabs on the Archivematica dashboard.

Note

As of Archivematica 1.7, this feature can be fully or partially disabled.

See also

Elasticsearch troubleshooting help from AtoM documentation.

Rebuild the indexes

Archivematica includes three Django commands to regenerate the Elasticsearch indexes.

Rebuild AIP indexes using filesystem

To recreate the AIP indexes from the filesystem you require access to the location paths of the AIP and Transfer Backlog storage locations. These usually are located in the following paths:

  • /var/archivematica/sharedDirectory/www/AIPsStore
  • /var/archivematica/sharedDirectory/www/AIPsStore/transferBacklog

You should confirm the paths of your installation in the Locations tab of the Storage Service.

To recreate AIP indexes from the filesystem, run the following command, passing the path of the AIP storage location you confirmed above.

Note

Please note, the execution of this command may take a long time for big AIP storage locations, especially if the AIPs are stored compressed.

sudo -u archivematica bash -c " \
    set -a -e -x
    source /etc/default/archivematica-dashboard || \
        source /etc/sysconfig/archivematica-dashboard \
            || (echo 'Environment file not found'; exit 1)
    cd /usr/share/archivematica/dashboard
    /usr/share/archivematica/virtualenvs/archivematica/bin/python \
        manage.py rebuild_elasticsearch_aip_index_from_files \
            /var/archivematica/sharedDirectory/www/AIPsStore --delete-all
";

The command accepts the following parameters:

  • [storage_location_path] [REQUIRED]: Path where the AIP storage location is located in the local filesystem.
  • --delete-all: Removes the entire indexes to regenerate the mapping and settings.
  • --delete: Removes matching AIP documents to avoid duplicates but keeps the index mappings and settings.
  • --uuid [aip_uuid]: Index a single AIP from the storage location.

It can be executed multiple times with different paths to index multiple AIP storage locations.

Rebuild AIP indexes using Storage Service API

This command uses the Storage Service API to determine which stored AIPs and AICs need to be reindexed (based on status and origin pipeline), and then reindexes those AIPs and AICs from temporarily downloaded copies of their METS files. This approach enables reindexing of AIPs/AICs stored in encrypted and some remote storage locations. However, this command must be run on the same system that Archivematica is installed on, since it uses code from the Archivematica codebase.

By default, the script will reindex every AIP and AIC in the Storage Service that has an origin pipeline that matches where the script is run from, and a status other than “DELETED”.

sudo -u archivematica bash -c " \
    set -a -e -x
    source /etc/default/archivematica-dashboard || \
        source /etc/sysconfig/archivematica-dashboard \
            || (echo 'Environment file not found'; exit 1)
    cd /usr/share/archivematica/dashboard
    /usr/share/archivematica/virtualenvs/archivematica/bin/python \
        manage.py rebuild_aip_index_from_storage_service --delete-all
";

The command accepts the following parameters:

  • --pipeline may be passed optionally to reindex packages from a different pipeline than the current dashboard.
  • -u or --uuid may be passed optionally to only reindex the AIP that has the matching UUID.
  • --delete will delete any data found in Elasticsearch with a matching UUID before re-indexing. This is useful if only some AIPs are missing from the index, since AIPs that already exist will not have their information duplicated.
  • --delete-all will delete the entire AIP Elasticsearch index before starting. This is useful if there are AIPs indexed that have been deleted, or if you would like to delete the ‘aips’ and ‘aipfiles’ indices entirely and recreate them using the most recent version of the Elasticsearch mappings.

Rebuild Transfer indexes

To regenerate the Transfers indexes, apart from access to the storage location, the command checks the transfer and transfer files existence in the Dashboard database. The indexes will be fully recreated with the current settings and mappings and populated with the Transfers from the location. Execution example:

Note

Please note, the execution of this command may take a long time for big Transfer Backlog storage locations.

sudo -u archivematica bash -c " \
    set -a -e -x
    source /etc/default/archivematica-dashboard || \
        source /etc/sysconfig/archivematica-dashboard \
            || (echo 'Environment file not found'; exit 1)
    cd /usr/share/archivematica/dashboard
    /usr/share/archivematica/virtualenvs/archivematica/bin/python \
        manage.py rebuild_transfer_backlog
";

The command accepts the following parameters:

  • --transfer-backlog-dir [storage_location_path]: Path where the Transfer Backlog storage location is located in the local filesystem. Default: /var/archivematica/sharedDirectory/www/AIPsStore/transferBacklog.
  • --no-prompt: Do not ask for confirmation.
  • --from-storage-service: Uses the Storage Service API to determine which stored transfers need to be re-indexed. Temporarily downloads a copy of each transfer via the API for indexing. This enables reindexing of packages stored in encrypted locations as well as some remote locations.

External access

For further interactions with the Elasticsearch indexes, to browse the data or to create visualizations, the following tools are recommended:

The index names are: aips, aipfiles, transfers and transferfiles.

Data backup

By default, there are three types of data that should be backed up:

  • Filesystem (particularly your storage directories)
  • MySQL and SQLite
  • Elasticsearch

In addition to the filesystem, below are some detailed instructions of what to back up, where it exists, and how to do it.

Data to back up from an Archivematica instance:

  1. MCP database (see below for details)
  2. SS database (see below for details)
  3. Elasticsearch indexes (see below for details)
  4. Pointer files (in the Storage Service internal processing location; the default location is /var/archivematica/storage_service)
  5. AM config in /etc/archivematica
  6. Processing configurations (in /var/archivematica/sharedDirectory/sharedMicroServiceTasksConfigs/processingMCPConfigs)

If doing an update or migration of Archivematica to a new server, the following may also be important to back up:

  1. Archivematica source code (/opt/archivematica) (to know which version of the software was installed, if there were custom changes, etc.)
  2. Archivematica shared directory (/var/archivematica/sharedDirectory/)

If your instance uses automation-tools, that should also be backed up:

  1. Source code (/opt/archivematica/automation-tools)
  2. Scripts (normally in /etc/archivematica/automation-tools)
  3. Crontab entries for automation-tools
  4. Automation database (normally in /var/archivematica/automation-tools/)
  5. Any other helper scripts source and databases

Archivematica Database backup and restore

MySQL is used to store short-term processing data. You can back up the MySQL database by using the following command:

mysqldump -u <your username> -p<your password> -c MCP > <filename of backup>

To restore from mysqldump file:

mysql -u <your username> -p<your password> MCP < MCP_backup.sql

Storage Service Database backup and restore

To backup the SQLite database and pointer files created by the storage service run:

rsync -av /var/archivematica/storage_service /backup/location/storage_service
rsync -av /var/archivematica/storage-service/storage.db /backup/location/storage.db

Note

The Storage Service must not be actively in use. Make sure the Storage Service is not running by stopping the nginx or storage-service services or by making the backup at a time that it is not in use.

To restore Storage Service from backup:

service archivematica-storage-service stop
rsync -av /backup/location/storage.db /var/archivematica/storage-service/storage.db
rsync -av /backup/location/storage_service /var/archivematica/storage_service
service archivematica-storage-service start

Elasticsearch

Elasticsearch is used to store long-term data. Instructions and scripts for backing up and restoring Elasticsearch are available in the Elasticsearch documentation.

Preconfiguration

The path.repo and snapshot repository have to be configured. For example, using /var/lib/elasticsearch/backup-repo as the repo path:

mkdir /var/lib/elasticsearch/backup-repo
chmod 0755 /var/lib/elasticsearch/backup-repo
chown elasticsearch:elasticsearch /var/lib/elasticsearch/backup-repo

Add this line to the /etc/elasticsearch/elasticsearch.yml file:

path.repo: /var/lib/elasticsearch/backup-repo

Restart elasticsearch:

service elasticsearch restart

To use a new directory as snapshot repository, create and adjust permissions for one, like so:

mkdir /var/lib/elasticsearch/backup-repo/es_backup_YOUR-NAME
chmod 0755 /var/lib/elasticsearch/backup-repo/es_backup_YOUR-NAME
chown elasticsearch:elasticsearch /var/lib/elasticsearch/backup-repo/es_backup_YOUR-NAME

Before any snapshot or restore operation can be performed, a snapshot repository should be registered in Elasticsearch. The repository settings are repository-type specific:

curl -XPUT -H 'Content-Type: application/json' 'http://localhost:9200/_snapshot/es_backup_YOUR-NAME' -d '{
    "type": "fs",
    "settings": {
        "compress" : true,
        "location": "/var/lib/elasticsearch/backup-repo/es_backup_YOUR-NAME"
    }
}'

Backing up Elasticsearch indexes

To make a backup (snapshot) for the aips, aipfiles, transfer and transferfiles indexes, a different name has to be used every time a snapshot is taken. For example, using the date inside the filename:

curl -XPUT -H 'Content-Type: application/json' 'http://localhost:9200/_snapshot/es_backup_YOUR-NAME/%3Csnapshot-am-%7Bnow%2Fd%7D%3E?wait_for_completion=true' -d'
{
  "indices": "aips,aipfiles,transfers,transferfiles",
  "ignore_unavailable": true,
  "include_global_state": false
}'

The snapshot will be saved to the /var/lib/elasticsearch/backup-repo/es_backup_YOUR-NAME directory. This directory can be backed up, for example, using rsync:

rsync -av /var/lib/elasticsearch/backup-repo/es_backup_YOUR-NAME /backup/location/elasticsearch

To list all the snapshots:

curl -XGET 'http://localhost:9200/_snapshot/es_backup_YOUR-NAME/_all?pretty=true'

To delete a snapshot:

curl -XDELETE 'http://localhost:9200/_snapshot/es_backup_YOUR-NAME/snapshot-am-YYYY.MM.DD'

Restoring Elasticsearch

Before restoring, the snapshot repo has to be registered in elasticsearch (see preconfiguration). It can be restored in a different server, configuring the repo.path, registering the snapshot repo (different paths and repo names can be used) and copying the files inside the /backup/location/elasticsearch directory.

The index will have to be closed before restoration can occur. To close the index, post to the following _close endpoints, like so:

curl -XPOST -H 'Content-Type: application/json' 'http://localhost:9200/aips,aipfiles,transfers,transferfiles/_close' -d'
{
  "ignore_unavailable": true
}'

To restore ElasticSearch:

curl -XPOST 'http://localhost:9200/_snapshot/es_backup_YOUR-NAME/snapshot-am-YYYY.MM.DD/_restore'

FAQ

How to clean up a full disk

“My Archivematica disk filled up and now Archivematica won’t work. How can I fix this?”

Archivematica servers have as much storage as they have been commissioned. If processing lots of very large files, particularly if working with normalization, this will cause the disk to fill up and cause the system to malfunction.

When the disk on an Archivematica instance is full, a number of steps need to be taken to recover.

Recovery protocol

  1. Clean up the disk by removing failed or rejected transfers, any excessive /tmp data, or anything else causing the disk to have filled up.
  2. Reset MySQL (or MariaDB, on CentOS) database.
  3. Reset Archivematica components in appropriate order (see restart-services for details).
  4. Set Elasticsearch back into write mode. The easiest way to do this is to run the following command:
curl -XPUT -H 'Content-Type: application/json' 'http://localhost:9200/_all/_settings' -d '{"index.blocks.read_only_allow_delete":null}'

How to restart services

“Something is not working right, or I need to stop a hanging transfer. What can I do?”

Archivematica is made up of these four core components:

archivematica-mcp-server
archivematica-mcp-client
archivematica-dashboard
archivematica-storage-service
Other services that Archivematica depends on are:
  • ClamAV
  • ElasticSearch
  • Gearman
  • MySQL (Ubuntu) or MariaDB (CentOS)
  • Nailgun
  • Nginx

Each service can be started/stopped/restarted with:

service <name> start|stop|status|restart

To restart all services, restart the Gearman service and each Archivematica component, in this order:

service gearmand restart
service archivematica-mcp-server restart
service archivematica-mcp-client restart
service archivematica-dashboard restart
service archivematica-storage-service restart

Note

Depending on your installation, gearmand might be called gearman-job-server.

Error stack trace

“I am getting a white error page in the Dashboard. How can I find out what the error is?”

All Archivematica services, including the Dashboard, have set up loggers that capture relevant events including warnings or errors.

Archivematica logs are stored in /var/log/archivematica/ but the final location may change depending on the environment or the logging configuration.

Transfer won’t start

“I try to create a new transfer, but nothing happens. What can I do?”

Sometimes a user may attempt to start a transfer and it will never seem to initiate the Archivematica processes. There are a few issues to look out for and investigate if this happens.

  1. File permissions

    First, the issue may be related to file permissions in the transfer source directory. Check the permissions in the directory and on the files to ensure that all files can be read by Archivematica.

  2. System timeouts

    If it is a large transfer, it may just be taking a long time to copy the files and initially load them into the system, and the user can wait a bit longer and see if the processes begin after a bit of time. It is also possible that it is taking a long time because some of the system timeouts are being exceeded and the transfer has failed. This can be verified by checking the Storage Service logs and by checking where the transfer exists on the filesystem.

    For inadequate timeouts, check the Storage Service configuration and adjust if necessary.

  3. Communication between Dashboard and Gearman

    If the transfer has successfully moved to the shared Directory (i.e. it can be found in sharedDirectory/watchedDirectories/activeTransfer/ folders), but is still not showing up in the dashboard, there could have been a problem with the communication between the dashboard and Gearman. Restarting all of the services can resolve this problem and the transfer will appear.

    Restart services in the follow order: gearmand, archivematica-mcp-server, archivematica-mcp-client, and archivematica-dashboard.

    Note that on some installations, gearmand may be called gearman-job-server.

How to clear user sessions

Administrators should use the Django clearsessions command to purge expired sessions perodically, e.g. via a cron job. This is how it is executed:

sudo -u archivematica bash -c " \
    set -a -e -x
    source /etc/default/archivematica-dashboard || \
        source /etc/sysconfig/archivematica-dashboard \
            || (echo 'Environment file not found'; exit 1)
    cd /usr/share/archivematica/dashboard
    /usr/share/archivematica/virtualenvs/archivematica/bin/python \
        manage.py clearsessions \
";

When using CAS authentication, it is additionally recommended to clear expired CAS sessions with ./manage.py django_cas_ng_clean_sessions immediately after running clearsessions. This is how it is executed:

sudo -u archivematica bash -c " \
    set -a -e -x
    source /etc/default/archivematica-dashboard || \
        source /etc/sysconfig/archivematica-dashboard \
            || (echo 'Environment file not found'; exit 1)
    cd /usr/share/archivematica/dashboard
    /usr/share/archivematica/virtualenvs/archivematica/bin/python \
        manage.py django_cas_ng_clean_sessions \
";

You can also clear active sessions by emptying the django_session table in the Archivematica database, e.g.:

mysql -hHOSTNAME -uUSERNAME -e "DELETE FROM MCP.django_session"

Clearing up active sessions forcibly logs out all users.

How to clear the application database

Archivematica 1.13 introduces a new management command for this specific purpose. It takes into account active packages and can be used to target packages of a certain age only. Please read the help message of the command for more details.

sudo -u archivematica bash -c " \
    set -a -e -x
    source /etc/default/archivematica-dashboard || \
        source /etc/sysconfig/archivematica-dashboard \
            || (echo 'Environment file not found'; exit 1)
    cd /usr/share/archivematica/dashboard
    /usr/share/archivematica/virtualenvs/archivematica/bin/python \
        manage.py help purge_transient_processing_data
";

The example below will destroy all records from the database as well as the search documents related to packages that completed more than six hours ago:

sudo -u archivematica bash -c " \
    set -a -e -x
    source /etc/default/archivematica-dashboard || \
        source /etc/sysconfig/archivematica-dashboard \
            || (echo 'Environment file not found'; exit 1)
    cd /usr/share/archivematica/dashboard
    /usr/share/archivematica/virtualenvs/archivematica/bin/python \
        manage.py purge_transient_processing_data --age='0 00:06:00'
";

Back to the top